Backpack Electrostatic Disinfectant Sprayer For Sale

Working Principle of electrostatic backpack sprayer

Electrostatic sprayer mainly consists of two parts: hand-held ultra low volume sprayer and high voltage electrostatic generator. Its working principle is to apply high voltage static electricity. A high voltage electrostatic field is formed between the sprayer and the crop. When the medicine liquid passes through the nozzle, high-voltage static electricity will be generated, and the medicine liquid will become a droplet with static charge after being ejected from the nozzle. Under the action of the electrostatic field, the droplets move directionally and spray evenly. Both the front and back of the leaves and the branches can absorb the droplets evenly.

Features of backpack electrostatic spray machine

The droplet size is uniform, the penetration is good, and the deposition coverage is even. In particular, on the back of the target can also be deposited.

Good adhesion, greatly reducing the phenomenon of mist droplets being lost by wind and rain.

Less drift loss, high utilization rate of electrostatic sprayer disinfectant, less environmental pollution, and wide application prospects.

Cautions when using electrostatic disinfection sprayer

1. Do not spray water-insoluble powder and chemicals with too high concentration (because it is easy to block the mating surface between one-way valve and one-way valve seat, causing the pressure drop of the machine or blocking the water outlet).

2. Press the "-" in the electrostatic spray state, press "O" in the normal spray state. When it is in electrostatic spray, it does not need to spray repeatedly on the upper and lower parts of the spray target. The environment with relatively high humidity will affect the electrostatic effect and not suitable for electrostatic spraying. In this case, change to normal spray. Know more details.

3. Keep the outside wall of the barrel dry when it is in electrostatic spray. Do not touch the nozzle and liquid medicine, and keep the grounding wire grounded. After shutdown, contact the nozzle with the ground to eliminate the residual static electricity.

4. When adding disinfectant to the barrel, turn off the static electricity.

Precautions after using YG electrostatic disinfection sprayer

1. After the disinfectant is applied, the medicine that has not been sprayed shall be poured into a special container, and then a part of clear water shall be added into the medicine box of the machine to let the machine run automatically for 1-2 minutes. This can automatically clean the pipe and pump body, avoid the corrosion of the electrostatic sprayer by the liquid, so that it can be used for a long time.

2, After cleaning the electrostatic sprayer, be sure to turn off the red power switch of the machine. Then invert the liquid in the medicine box to a safe place to avoid water pollution.

3. Spray personnel must carry out their own cleaning to avoid the harm of disinfectant to themselves or the harmful substances brought to the human body due to diet.

Types of Intelligence Disinfection Channel

In daily life, we go in and out of various places every day, facing a variety of doors. In addition to the automatic doors at the entrances of certain operating stores, we need to touch many doors every day and open the doors by pulling or pushing. The door handle becomes an object that everyone needs to touch when entering and leaving, and all kinds of people have made a cross-contact process through the door. In a densely populated area, if one of the people using the door carries germs, the medium of the door can make many people more likely to cause disease.

During certain infectious diseases, measures have to be taken to disinfect the door handles and wash hands repeatedly. These measures either need to increase the work intensity of the cleaning staff or require individuals to improve safety and health awareness, which are not very convenient, there is also a waste of time, and it is not a perfect solution. YG intelligence gate solved this problem.

What is the atomization disinfection door?

Intelligent disinfection channel is used to disinfect personnel and articles entering and leaving the epidemic prevention area. At the same time, disinfection tunnel channel can be used for the disinfection of medical clothing, medical equipment, and medical waste. Different types of automatic disinfection channel have different structures. But there is no great difference in the appearance of the modeling structure.

What is the ozone disinfection cabin?

Ozone is a broad-spectrum and efficient bactericide. In foreign countries, it was first used for water consumption. Ozone disinfection is not only effective and reliable. And it does not produce halogenated organic compounds with carcinogenic effect. With the development of disinfection technology, the application range of ozone decontamination is also increasingly wide, which has attracted more and more attention. The ozone molecule consists of three oxygen atoms. That is O3. About 95% of ozone in the atmosphere comes from the photochemical reaction between the sun and plant volatiles, as well as the ionization between lightning and air. This product uses static electricity to simulate lightning to produce ozone.

What is UV disinfection door

Automatic disinfection door, which includes door panel, door closer and door handle on the door panel, automatic disinfection door also includes variable speed gear box, kinetic energy generator, ultraviolet LED tube, variable speed gear box and kinetic energy generator are integrated into the door closer. The door closer drives the kinetic energy generator to generate electricity through the variable speed gear box. The kinetic energy generator provides electric energy for the ultraviolet light-emitting LED tube. The ultraviolet light-emitting LED tube is placed in the door handle, and the surface of the door handle has a photocatalyst titanium dioxide coating.

The door closer provided in the automatic disinfection door provided by the utility model converts the kinetic energy into electrical energy as the door opens and closes. And transmits it to the ultraviolet light-emitting LED tube through the circuit pre-buried in the door panel. So that the ultraviolet light-emitting LED tube can continue to emit light stably. And trigger the photocatalyst titanium dioxide coating on the door handle to improve the efficiency and stability of sterilization and disinfection. Therefore, the door handle can be continuously and automatically disinfected.

Advantages of intelligent atomization disinfection door products

1. Food level disinfection, safe and effective, non-contact disinfection.

2. Matrix full body disinfection without a dead angle.

3. Humanized design and reasonable layout will not cause discomfort of the respiratory tract and other organs.

4. The whole stainless steel material is corrosion-resistant and deformation-resistant, light and movable. Click here to know more Yugong machinery.

5. Multi disinfection of plasma, ultraviolet, light-wave, more thorough disinfection.

6. 220V city power, convenient switch, simple operation, economic and environmental protection.

7. Human body temperature alarm and thermal imaging temperature detector can be added to detect human body temperature.

FOG CANNON DUST SUPPRESSION TRUCK

FEATURES OF FOG CANNON DUST SUPPRESSION TRUCK

The fog cannon dust suppression vehicle can hold 10 tons of water in the car for 75 minutes spray. The sprayed water mist particles reach the micron level, which can quickly and effectively decompose the pollutant particles and dust in the air. Not only is the multi-functional fog cannon vehicle more efficient than ordinary sprinklers, it can also prevent road area water from affecting traffic. Anti-corrosion and anti-corrosion treatment of the tank body of the fog cannon car, spraying disinfectant, pesticides, etc. in an emergency, is a multi-functional dust suppression truck spraying model.

DUST SUPPRESSION TRUCK

CONFIGURATIONS OF MULTI-FUNCTIONAL DUST SUPPRESSION VEHICLE

● Large-capacity, high-security lithium-ion power battery.

● Strong power, the maximum speed can reach 90 km/h, and the maximum gradient is ≥25%.

● Matching the four-speed automatic gearbox, equipped with automatic electro-hydraulic gear shifting.

● Achieve dual leading in braking energy recovery and electric vehicle braking safety.

● Advanced and perfect high-voltage power distribution management to ensure the high-voltage safety and system stability of the whole vehicle.

● Auto cruise and PTO function.

● Centralized flushing, front duckbill flushing, rear sprinkling, left and right greening irrigation, dust suppression and other functions in one.

● The integrated intelligent instrument can query and monitor the status of each working device in real-time, including speed, voltage, current, temperature, etc., and it is convenient and simple to use and maintain.

● Constant speed driving range exceeds 240 kilometers.

DUST SUPPRESSION VEHICLE

APPLICATIONS OF DUST SUPPRESSION FOG CANNON TRUCK

Spraying disinfectant on airports, highways, stations, docks, public places and landfill sites, dust removal, moisturizing and cooling disinfection on sports fields and hot fields. Click here to know other kinds of fogging machines for large area disinfection. https://yugongengineering.com/thermal-fogging-machine/

Dust pollution control and port environment control at coal wharf, ore and bulk powder handling, coastal port dumpsite, bucket turbine operation, shipping and transshipment, river channel regulation, etc.

Material transportation, such as vehicles and heavy vehicles transporting coal coke, sand, earthwork, garbage, residua and other materials prone to dust pollution, shall be treated for dust pollution caused by material residue or leakage during transportation.

Treatment of dust pollution caused by coal yards, coal warehouses or fully closed coal storage sites, coal logistics parks, coal collection stations, open-pit coal mining, and road and air dust pollution after blasting.

YG DUST CONTROL TRUCK